A restorative acidic cleaner for ceramic or porcelain tile and grout, masonry, and concrete.
This is a safer alternative than phosphoric or muratic acids. Removes
grout haze, hard water deposits, soap scum, rust spots and
efflorescence. Contains no harsh fumes and is low foaming.       

Ready to use pH is 1.0 (16:1 Dilution)

Tile Restore will etch marble, limestone, and other acid sensitive
materials (ie metals and frosted glass). Do not overspray on surfaces
not to be cleaned. If overspray occurs, rinse thoroughly. Always test
to determine desired results in an inconspicuous area before using.
loose debris by sweeping or vacuuming. Mix above solution well and
apply to surface with mop, sponge, or sprayer. Allow to dwell for 5
minutes, agitate with a scrub brush, and rinse and extract thoroughly.
Do not allow product to dry on surface as this may make removal
difficult. Rinse equipment after use. For best results rinse with Tile
Neutral Clean & Rinse. Reseal cleaned area with Tile Aqua or Tile
Ultimate sealers.



Use          Tile Cleaner/Water    Tile Restore:Water
Heavy          128 oz/Gallon              1:1
Medium         32 oz/Gallon              1:4
Light               8 oz/Gallon              1:16