Mop/Wet Vacuum Stripping System: Dilute in cold or mildly
warm water from one part product to 2 parts water for
heavily built‐up or highly burnished finishes, to one part
product to five parts water for normal build up. Apply
liberally with a mop to an area small enough so as not to
allow the product to dry and allow standing for 3 to 5
minutes. Agitate with a mop and remove solution and old
finish with a wet vacuum. Allow floor to dry thoroughly and
apply new finish as directed by manufacturer. If complete
stripping is not accomplished repeat above procedure before
re‐application of new finish.
Floor Machine Stripping System: Dilute and apply product as
above using a dilution of 1 part product to 16 parts water
varying according to build‐up conditions. Product may be
applied with a mop or Automatic Scrubber. Allow to stand
for 3 to 5 minutes, scrub with a rotary floor machine or
automatic scrubber equipped with stripping pads. Remove
solution and old finish with a wet vacuum and allow floor to
dry completely. If desired, a rinsing step can be added. Apply
new finish per manufactures recommendation.
